Feed pellet mills are used to produce animal feed pellets. Before wood pellet energy, the predominant use of the pellet mill, was for the animal feed industry.
There are more than a few reasons the animal feed industry choose pellets, many of the reasons are similar to the compensation of biomass pellet fuel. By way of a feed pellet mill it is probable to manufacture exact feed blends for specific animals. Blends of dissimilar minerals and vitamins can be added to the raw feed mix in specific quantities. This method the animals intake can also be precisely controlled so they have enough, but not too much. Also in pellet form it is much easier for the farmer to ration out the correct amount of feed per day.
The other payback of processing animal feed in a feed pellet mill are very similar to biomass pellets. Due to increased compression, much more feed can be stored in one location. Also the feed stores much better, keeping the feed in a good condition. Also the increased compression in addition to reduced volume of the feed method its possible to transport more per vehicle. This method reduced transport costs.
Learn more about Pellet Mill
There are several dissimilar designs of pellet mill. At the beginning of the 20th century when the first pellet mills were used for feed pellet manufacture, a flat die design of pellet mill was used. The flat die design is still used in feed pellet production today, however other designs are now also common.
The pellet mill comprises a set of rollers as well as die, as material enters the pellet mill it is compressed through the holes in the die to form the pellet shape. This is an extremely simplified version of the process, as in reality quite a few factors impact on the process along with the ability to create quality pellets. The guide goes into these areas in detail.
Read more about Hardwood Pellets
Along with the pellet mill, there are various other pieces of equipment used in pellet production. In many cases the first piece of equipment used is the hammer mill. A hammer mill works on attrition, along with the speed of the hammers impacting on the raw material reduces it to a small uniform size, usually a few millimetres.
The diameter of the particles required, depends on the size of pellets produced. Generally yet, the size of the particles must be smaller than the size of the pellet shaped. So for case in point to manufacture 6mm pellets, particles below 6mm are most wanted for the pellet mill. The pellet mill may also be referred to as a pellet machine or pellet press, all terms are acceptable. The pellet production guide covers the process step by way of step. This includes raw material size reduction, material preparation, pellet compression etc. It also includes information on the compensation plus disadvantages of diverse designs of pellet mill.
For more information on Flat Die Pellet Mills
